Interactive Whiteboard, Projector and Stand


Bi-Bright -Global Education Solution

Interactive Whiteboard

Interactive WhiteBoard FLYER

Interactive board with 78´´ inch diagonal

Infrared based interactive multi-touch technology

Minimum in Built Memory of 2 GB

No electromagnetic field emissions

Ability to write, erase and execute mouse functions with finger or pen
Interactive Whiteboard Software supplied with all functionalities

Connection through 16’ (5m) USB cable 2.0 to the computer

Power is obtained from the computer directly through USB cable for Windows®, MAC® and Linux® computers

Plug and Play for Windows® 7 and above, MAC® and Linux® computers. Does not require additional setup and is MS Windows 8 multitouch compliant.

All cables and connections included for proper function

Working temperatures between 5º and 45º

Power consumption under 0.5W


4:3 Active screen area 78´´

The Surface is porcelain, enamel on steel, hard, resistant, with low glare for eye protection, optimized for projection, built for intensive use, compatible to use on the dry markers and easily cleaned with whiteboard cleaner.

Multi-touch sensitive, recognizes the presence of pen, finger or hand on board surface, with no wires, batteries or any need to recharge pens.

Precision: 2 mm

Response time: First touch – 25 ms; Continuous – 8ms

Mounting Stand

Mounting Stand

Mobile solution including a solid steel tube Ø50 x 2mm, with a very resistant support for the interactive whiteboard. It also features a rotating arm structure in solid steel tube Ø50 x 2 mm, color anthracite (RAL 7021), sufficiently rigid to avoid vibration of the arm and hence the image projector, while using the frame.

The length of the arm supporting the projector is less than 1000mm.
The mobile structure supports the interactive whiteboard and the video projector, ensuring that all of these elements move vertically and simultaneously.

The height adjustment is done manually (without using an electric motor) via a hydraulic piston system with self- locking button.

Ground support via 4 wheels, 2 of which with brakes.

The charger container can store until 12 netbooks, featuring a minimum of 12 energy points and one for teacher laptop.

All electrical components are connected internally, with only a power plug and network abroad.

The video projector is protected by Kensington Locks
The swiveling holder has a special structure for inserting the netbook



3LCD™ Display Technology

SHORT-THROW distance under 1m for 78”

Native resolution: XGA

No less than 2500 ANSI Lumens

Lamp Hours from 5000 up to 6000 hours

1024 x 768 Native resolution Min

4:3; 16:9 Possible Aspect Ratio

3000:1 Contrast Ratio

Digital Zoom x1.35 Possible

Video Compatibility NTSC, PAL, SECAM, HDTV (480i, 480p, 576i, 576p, 720p, 1080i,1080p)

Connectivity Input Video 1 x RCA, 1 x S-Video, 2 x Component (D-sub 15-pin), 1 HDMI

Input Computer 2 x D-sub 15-pin (RGB), 1 x USB 2.0 type B

Input: USB Memory Device 1 x USB 2.0 type A

Input Audio 2 x Stereo mini-jack, 1 x RCA (White/Red), 1 x USB 2.0 type B, 1 x HDMI

Input: Control 1 x LAN (RJ45), 1x RS-232C (D-sub 9-pin), Network 1 x LAN (RJ45)

Output Computer 1 x D-sub 15-pin

Speaker Output 1 x 16 watt

Included Remote Control

VGA Cable Power Cord

Extra Lamp Hours 3000 hours

Fixing kit on the Interactive board Arm included

Leave a Reply